Brocade Network OS Command Reference v4.1.0 - Manual (Page 1336)

1298 Network OS Command Reference
53-1003115-01
system-monitor-mail
2
system-monitor-mail
Configures Fabric Watch e-mail alerts on the switch.
Synopsis system-monitor-mail {fru |interface | relay {host_ip |domain_name} |security | sfp} enable |
email-id]
no system-monitor-mail
Operands fru Configures e-mail alerts for FRUs.
interface Configures e-mail alerts for interfaces.
relay Configures the relay host for e-mail to work in a non-DNS environment.
host_ip Specifies the IPv4 address of the mail server.
domain_name Specifies the domain that corresponds to the e-mail ID.
security Configures e-mail alerts for security.
sfp Configures e-mail alerts for SFPs.
enable Enables or disables e-mail alerts for the above options.
email-id Specifies the e-mail address to where the alert will be sent.
Defaults The default source is disabled.
Command Modes Global configuration mode
Description Use this command to configure Fabric Watch e-mail alerts on the switch.
Usage Guidelines For an e-mail alert to function correctly, add the IP addresses and host names to DNS in addition
to configuring the domain name and name servers. Both relay parameters (the host IP address
and the domain name) must be configured in a non-DNS environment. In a DNS environment, only
the host IP address is required).
Examples
switch(config)# system-monitor-mail ?
Possible completions:
fru Configure FRU mail settings
interface Configure interface mail settings
relay Configure relay ip mail settings
security Configure security mail settings
sfp Configure sfp mail settings
switch(config)# system-monitor-mail fru enable
switch(config)# system-monitor-mail relay ?
Possible completions:
switch(config)# system-monitor-mail relay 1.2.3.4 ?
Possible completions:
domain-name Domain name server
switch(config)# system-monitor-mail relay 1.2.3.4 domain-name ?
Possible completions:
Domain name[]