Copy – Brocade Network OS Command Reference v4.1.0 User Manual

Page 197

Network OS Command Reference

159

53-1003115-01

copy

Copies configuration data.

Synopsis

copy source_file destination_file

Operands

source_file

The source file to be copied. Specify one of the following parameters:

default-config

The default configuration.

global-running-config

Global data of the running configuration. (Available in both fabric

cluster mode and logical chassis cluster mode.)

local-running-configuration

Local data of the running configuration. (Available in fabric

cluster mode only.)

rbridge-running-configuration rbridge-id

Running configuration of a specified RBridge.

(Available in logical chassis cluster mode only.)

running-config

The running configuration.

startup-config The

startup

configuration.

flash://filename A file in the local flash memory.

ftp://username:password@host_ip_address/path

A file on a remote host. Transfer protocol is FTP.

scp://username:password@host_ip_address/path

A file on a remote host. Transfer protocol is SCP.

sftp://username:password@host_ip_address/path

A file on a remote host. Transfer protocol is SFTP.

usb://path

A file on an attached USB device.

destination_file

The destination file. Specify one of the following parameters: