Show running-config zoning – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1187

Network OS Command Reference

1149

53-1003115-01

show running-config zoning

Displays the zoning configuration.

Synopsis

show running-config zoning [defined-configuration | enabled-configuration]

Operands

defined-configuration Displays the defined configuration parameters. See show running-config

zoning defined-configuration.

NOTE

To display the enabled-configuration enabled-zone information, use the show zoning
enabled-configuration command.

enabled-configuration Displays the enabled configuration parameters. See show running-config

zoning enabled-configuration.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display the zoning configuration for a Brocade VCS Fabric. The base
command lists both the defined and the enabled configuration.

Usage Guidelines

This command is supported in VCS mode. Zoning configuration data are automatically distributed
among all RBridges in the VCS Fabric. Standalone mode is not supported. For information about
enabled zones, refer to the previous Note.

This command can be entered on any RBridge in a Brocade VCS Fabric.

Examples

The following example displays the zoning configuration:

switch# show running-config zoning

zoning defined-configuration cfg cfg1

member-zone zone1

member-zone zone2