Brocade Network OS Command Reference v4.1.0 - Manual (Page 56)

18 Network OS Command Reference
53-1003115-01
access-list
2
access-list
Creates an ACL.
Synopsis {ip | ipv6 | mac} access-list {standard | extended} NAME
no {ip | mac} access-list {standard | extended} NAME
Operands ip | ipv6 | mac Displays the configured rules of either a Layer 2 or Layer 3 ACL.
standard | extended Specifies the ACL type.
access-list NAME Specifies the name assigned to the access list.
Defaults None
Command Modes Global configuration mode
Description Use this command to create an ACL on an interface.
Usage Guidelines Use the no form of this command to remove an ACL from an interface.
Examples None
See Also None