beautypg.com

Brocade Network OS Command Reference v4.1.0 User Manual

Page 1101

background image

Network OS Command Reference

1063

53-1003115-01

show running-config interface tengigabitethernet fabric

2

show running-config interface tengigabitethernet fabric

Displays fabric protocol configuration parameters for a 10-gigabit Ethernet interface.

Synopsis

show running-config interface tengigabitethernet [rbridge-id/slot/port] fabric [isl [enable] |
trunk [enable]]

Operands

rbridge-id

Specifies a switch by its RBridge ID.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

isl [enable]

Indicates only the administration and operational state of the Inter-Switch
Link (ISL).

trunk [enable]

Indicates only whether trunking is enabled on the port.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display ISL and trunking status for the specified 10-gigabit Ethernet
interface.

Usage Guidelines

None

Examples

switch# show running-config interface tengigabitethernet 1/0/49 fabric

interface tengigabitethernet 1/0/49

fabric isl enable

fabric trunk enable

See Also

fabric isl enable, fabric trunk enable