Brocade Network OS Command Reference v4.1.0 - Manual (Page 933)

Network OS Command Reference 895
53-1003115-01
show ip pim rp-map
2
show ip pim rp-map
Displays the Rendezvous Point (RP) to group mappings.
Synopsis show ip pim rp-map [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the RP to group mappings.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim rp-map
Number of group-to-RP mappings: 6
Group address RP address
-------------------------------
1 239.255.163.1 99.99.99.5
2 239.255.163.2 99.99.99.5
3 239.255.163.3 99.99.99.5
4 239.255.162.1 99.99.99.5
5 239.255.162.2 43.43.43.1
6 239.255.162.3 99.99.99.5
See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,
show ip pim rp-hash, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic