Brocade Network OS Command Reference v4.1.0 - Manual (Page 928)

890 Network OS Command Reference
53-1003115-01
show ip pim group
2
show ip pim group
Displays the list of multicast groups.
Synopsis show ip pim group [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display a list of the multicast groups that Protocol Independent
Multicast (PIM) has learned. All groups, irrespective of how PIM learned them, are displayed.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim group
Total number of groups: 2
1 Group 225.0.0.1
Group member at Te 19/2/1: Te 19/2/1
Group member at Ve 100: Ve 100
2 Group 225.0.0.2
Group member at Te 19/2/1: Te 19/2/1
Group member at Ve 100: Ve 100
See Also router pim, show ip pim bsr, show ip pim neighbor, show ip pim rpf, show ip pim rp-hash,
show ip pim rp-map, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic