Brocade Network OS Command Reference v4.1.0 - Manual (Page 525)

Network OS Command Reference 487
53-1003115-01
nasport server-ip
2
nasport server-ip
Identifies the port that is to receive Auto NAS (automatic network attached storage) traffic.
Synopsis nasport server-ip address
no nasport server-ip address
Operands address IP address to receive NAS traffic.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to specify or disable the Auto NAS server port.
Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T
switches.
Use the no form of this command to disable the Auto NAS feature.
Examples None
See Also auto-qos enable, clear nas statistics, nas auto-qos, show nas statistics,
show running-config nas server-ip, show system internal nas, show cee maps