Switchport private-vlan mapping – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1322

1284

Network OS Command Reference

53-1003115-01

switchport private-vlan mapping

Maps primary VLAN and secondary VLAN to a promiscuous port.

Synopsis

switchport private-vlan mapping primary_vlan_ID [add | remove] secondary_vlan

no switchport private-vlan mapping

Operands

primary_vlan_ID

The primary VLAN identification. Refer to the Usage Guidelines.

add

Adds the secondary VLAN to the primary mapping.

remove

Removes the secondary VLAN from the primary mapping.

secondary_vlan

The secondary VLAN identification.

Defaults

The port does not have any PVLAN attributes by default.

Command Modes

Interface subtype configuration mode

Description

This command maps primary VLAN and secondary VLAN to a promiscuous port. This command
also maps a promiscuous port to selected secondary VLANs. This means only selected VLAN can
send packets to this port.

Usage Guidelines

On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:

•

On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

•

On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

Examples

None