Brocade Network OS Command Reference v4.1.0 - Manual (Page 1404)

1366 Network OS Command Reference
53-1003115-01
vrf-lite-capability (OSPF)
2
vrf-lite-capability (OSPF)
Disables the down-bit (DN bit) that is set when routes are redistributed from multiprotocol BGP
(MP-BGP) to OSPF,
Synopsis vrf-lite-capability
no vrf-lite-capability
Operands None
Defaults None
Command Modes OSPF VRF router configuration mode
Description Use this command to disable the down-bit (DN bit) that is set when routes are redistributed from
multiprotocol BGP (MP-BGP) to OSPF. A customer edge (CE) router acts the provider edge (PE)
router in VRF Lite. Because PE routers advertise VPN routes to CE routers with the DN-bit set,
these checks should be disabled in a VRF Lite context. If CE routers receive routes with the DN-bit
set, they discard those routes.
Usage Guidelines Enter no vrf-lite-capability to disable this feature.
Examples
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)# router ospf vrf orange
switch(config-router-ospf-vrf-orange)# vrf-lite-capability
See Also None