Logging syslog-facility local – Brocade Network OS Command Reference v4.1.0 User Manual

Page 469

Network OS Command Reference

431

53-1003115-01

logging syslog-facility local

Configures the syslog facility.

Synopsis

logging syslog-facility local log_level

Operands

log_level

Specifies the syslog facility level. Valid log levels include the following:
LOG_LOCAL0, LOG_LOCAL1, LOG_LOCAL2, LOG_LOCAL3, LOG_LOCAL4,
LOG_LOCAL5, LOG_LOCAL6, LOG_LOCAL7

Defaults

Syslog level is LOG_LOCAL7.

Command Modes

Global configuration mode

Description

Use this command to configure the log level for all error log entries to forward to one or more
specified servers. You can configure up to four servers.

Usage Guidelines

When used without a log level parameter, use this command to display the current value.

This command is supported only on the local switch.

This command is not supported on the standby management module.

Examples

To configure the syslog facility level:

switch(config)# logging syslog-facility local LOG_LOCAL5