Brocade Network OS Command Reference v4.1.0 - Manual (Page 949)

Network OS Command Reference 911
53-1003115-01
show lldp interface
2
show lldp interface
Displays the LLDP status on the specified interface.
Synopsis show lldp interface [tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the LLDP status on the specified interface.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display all the LLDP interface information for a selected interface:
switch# show lldp interface tengigabitethernet 1/0/0
LLDP information for Te 1/0/0
State: Enabled
Mode: Receive/Transmit
Advertise Transmitted: 30 seconds
Hold time for advertise: 120 seconds
Re-init Delay Timer: 2 seconds
Tx Delay Timer: 1 seconds tengigabitethernet
DCBX Version : CEE
Auto-Sense : Yes
Transmit TLVs: Chassis ID Port ID
TTL IEEE DCBX
DCBX FCoE App DCBX FCoE Logical Link
Link Prim Brocade Link
DCBX FCoE Priority Bits: 0x8
See Also None