Clear counters access-list (ip) – Brocade Network OS Command Reference v4.1.0 User Manual

Page 131

Network OS Command Reference

53-1003115-01

clear counters access-list (ip)

Clears the IP ACL counters for all interfaces that have ACL applied on them or for a specific
interface.

Synopsis

clear counters {all | access-list ip IP_ACL | interface {port-channel number |
gigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |
fortygigabitethernet rbridge-id/slot/port} | slot-id number | ve vlan_id} {in | out}

Operands

IP ACL

Specifies the name of the IP ACL. A maximum of 63 characters is allowed.

in | out

Specifies the binding direction (ingress or egress). In and out parameters
are used for access-list ip only.

interface

Specifies the use of the port-channel, fortygigabitethernet, gigabitethernet,
tengigabitethernet, or vlan keyword.

port-channel number Specifies the interface is a port-channel. The number of available channels

range from 1 through 6144.

fortygigabitethernet rbridge-id/slot/port

Specifies a valid 40-gigabit Ethernet interface.

rbridge-id

Specifies the RBridge ID. This is not valid in standalone mode.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

Specifies the ingress direction.

interface

Specifies the interface.

out

Specifies the egress direction.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id

Specifies the RBridge ID. This is not valid in standalone mode.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

Specifies the ingress direction.

interface

Specifies the interface.

out

Specifies the egress direction.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id

Specifies the RBridge ID. This is not valid in standalone mode.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

Specifies the ingress direction.