Brocade Network OS Command Reference v4.1.0 - Manual (Page 1292)

1254 Network OS Command Reference
53-1003115-01
speed (LAG)
2
speed (LAG)
Sets the speed on the LAG interface.
Synopsis speed {1000 | 10000 | 40000}
Operands 1000 Forces the speed to 1 Gbps.
10000 Forces the speed to 10 Gbps.
40000 Forces the speed to 40 Gbps.
Defaults Speed is 10000
Command Modes Interface subtype configuration mode
Description Use this command to set the speed negotiation value for the interface.
Usage Guidelines The speed command is available only for 10-gigabit Ethernet ports.
Examples None
See Also None