Brocade Network OS Command Reference v4.1.0 - Manual (Page 867)

Network OS Command Reference 829
53-1003115-01
show ip bgp attribute-entries
2
show ip bgp attribute-entries
Displays BGP4 route-attribute entries that are stored in device memory.
Synopsis show ip bgp attribute-entries [rbridge-id rbridge-id]
Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description The route-attribute entries table lists the sets of BGP4 attributes that are stored in device memory.
Each set of attributes is unique and can be associated with one or more routes. In fact, the device
typically has fewer attribute entries than routes. Use this command to view BGP4 route-attribute
entries that are stored in device memory.
Usage Guidelines None
Examples
switch# show ip bgp attribute-entries
See Also None