Brocade Network OS Command Reference v4.1.0 - Manual (Page 397)

Network OS Command Reference 359
53-1003115-01
ip igmp snooping enable (global version)
2
ip igmp snooping enable (global version)
Enables Internet Group Management Protocol (IGMP) snooping for all VLAN interfaces.
Synopsis ip igmp snooping enable
no ip igmp snooping enable
Operands None
Defaults IGMP snooping is globally disabled.
Command Modes Global configuration mode
Description Use this command to enable or disable the Internet Group Management Protocol (IGMP) snooping
globally.
Usage Guidelines This command enables IGMP snooping at the global level causing feature to be automatically
enabled at all the already configured VLANs. In presence of this command, later if a VLAN is
created, IGMP snooping will get enabled for that VLAN as well.
Enter no ip igmp snooping enable to return to the default setting.
Examples To enable IGMP globally:
switch(config)# ip igmp snooping enable
See Also ip igmp snooping enable, show ip igmp snooping