Brocade Network OS Command Reference v4.1.0 - Manual (Page 650)

612 Network OS Command Reference
53-1003115-01
region
2
region
Specifies the Multiple Spanning Tree Protocol (MSTP) region.
Synopsis region region-name
no region
Operands region-name Assigns a name to an MSTP region.
Defaults None
Command Modes Protocol Spanning Tree MSTP configuration mode
Description Use this command to assign a name to an MSTP region.
Usage Guidelines The region-name string must be between 1 and 32 ASCII characters in length, and is
case-sensitive.
If MSTP is enabled over VCS, this command must be executed on all RBridge nodes
Enter no region to delete the region name.
Examples To assign a name to an MSTP region named brocade1:
switch(config)# protocol spanning-tree mstp
switch(conf-mstp)# region brocade1
See Also revision, show spanning-tree