Brocade Network OS Command Reference v4.1.0 - Manual (Page 862)

824 Network OS Command Reference
53-1003115-01
show interface status
2
show interface status
Displays the interface status.
Synopsis show interface status [rbridge-id rbridge-id | range | all]
Operands rbridge-id rbridge-id The unique identifier for a switch, or set of switches. The range of valid
values is from 1 through 239.
range A range of rbridge-id values. The range string can be discontiguous, such as
“1-3,5”.
all Selects all of the members of the logical chassis cluster.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display interface status.
Usage Guidelines None
Examples Typical command output:
switch# show interface status
--------------------------------------------------------------------------------
Port Status Vlan Speed Type Description
--------------------------------------------------------------------------------
Te 1/0/1 connected Trunk 10G 10G-SFPP-LR
Te 1/0/2 connected 1 10G 10G-SFPP-SR
Po 1 connected Trunk 40G --
Po 2 connected 1 20G --
See Also None