Brocade Network OS Command Reference v4.1.0 - Manual (Page 123)

Network OS Command Reference 85
53-1003115-01
clear arp
2
clear arp
Clears the ARP statistics cache on the host.
Synopsis clear arp [interface gigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port
[no-refresh]] | fortygigabitethernet rbridge-id/slot/port [no-refresh]] | [ip ip-address [no-refresh] |
[no-refresh] | ve vlan_id | vrf vrf_name [rbridge-id rbridge-id} | all]]
Operands interface Clears the ARP cache for the specified interface only.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
no-refresh Deletes the ARP entries.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
no-refresh Delete the ARP entries.
ip Clears the statistics on all interfaces.
ip-address Clear the ARP for this next-hop IP address.
no-refresh Delete the ARP entries.
ve vlan_id Specifies a VLAN. (Refer to the Usage Guidelines.)
no-refresh Deletes the ARP entries.
vrf vrf_name Specifies a VRF instance.
rbridge-id rbridge-id
Specifies an RBridge.
all Specifies all RBridges.
Defaults On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs are
as follows: