Brocade Network OS Command Reference v4.1.0 - Manual (Page 989)

Network OS Command Reference 951
53-1003115-01
show port-profile interface
2
show port-profile interface
Displays AMPP port-profile information for interfaces.
Synopsis show port-profile interface [all | port-channel channel-group-number |
fortygigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands all Displays the port-profile information for all interfaces.
port-channel channel-group-number
Specifies a LAG port channel-group number to display. Valid values range
from 1 through 63 for standalone mode, and 1 through 6144 for Brocade
VCS Fabric mode.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display AMPP port-profile information for either all interfaces, or for specific
interfaces.
Usage Guidelines None
Examples None
See Also show running-config, show port-profile