Clear fcoe login – Brocade Network OS Command Reference v4.1.0 User Manual

Page 148

110

Network OS Command Reference

53-1003115-01

clear fcoe login

Clears the FCoE login for a given FCoE interface, vlan, vfid, or device WWN.

Synopsis

clear fcoe login [interface fcoe vn-number/rbridge-id/front-port-number] | [vlan vlan_id] |
[interface tengigabitethernet rbridge-id/slot/port] | [vfid vfid] | [device device-wwn]

Operands

interface fcoe vn-number/rbridge-id/front-port-number

The VN number/RBridge ID/front-port number for the virtual-fabric.

vlan vlan_id

The VLAN ID for the device. (Refer to the Usage Guidelines.)

interface tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id

Specifies the RBridge ID. This is not valid in standalone mode.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

vfid vfid

The virtual fabric ID for the device.

device device-wwn

The World Wide Name of the device.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to clear the FCoE login for a given FCoE interface, VLAN, VFID, or device WWN.

Usage Guidelines

On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:

•

On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

•

On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.