Brocade Network OS Command Reference v4.1.0 - Manual (Page 837)

Network OS Command Reference 799
53-1003115-01
show file
2
show file
Displays the contents of a file.
Synopsis show file filename
Operands filename The name of the file to be displayed.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the contents of a file in the local flash memory.
Usage Guidelines This command is supported only on the local switch.
Examples To display the contents of the startup configuration file:
switch# show file startup-config-copy
diag post rbridge-id 237
no enable
!
linecard 2 LC48x10G
linecard 4 LC48x10G
class-map default
match any
!
logging rbridge-id 237
raslog console INFO
!
logging auditlog class SECURITY
logging auditlog class CONFIGURATION
logging auditlog class FIRMWARE
logging syslog-facility local LOG_LOCAL7
switch-attributes 237
chassis-name VDX8770-4
host-name sw0
!
support rbridge-id 237
ffdc
!
snmp-server contact "Field Support."
snmp-server location "End User Premise."
snmp-server sys-descr "Brocade VDX Switch."
snmp-server community ConvergedNetwork
snmp-server community OrigEquipMfr rw
snmp-server community "Secret C0de" rw
snmp-server community common
snmp-server community private rw
snmp-server community public
snmp-server host 172.26.3.84 public
udp-port 5000
severity-level Info
!
(output truncated)
See Also copy, delete, dir, rename