Brocade Network OS Command Reference v4.1.0 - Manual (Page 519)

Network OS Command Reference 481
53-1003115-01
monitor session
2
monitor session
Enables a Port Mirroring session for monitoring traffic.
Synopsis monitor session session_number
no monitor session session_number
Operands session_number Specifies a session identification number. Valid values range from 0
through 511 in logical chassis mode, 0 through 23 for standalone mode.
Defaults None
Command Modes Global configuration mode
Description Use this command to enable a session for monitoring traffic.
Usage Guidelines The source and destination ports must be in the same port-group on a Brocade VDX 6720-60.
Enter no monitor session to delete the port mirroring session.
Examples To enable session 22 for monitoring traffic:
switch(config)# monitor session 22
switch(config-session-22)# source tengigabitethernet 0/1 destination
tengigabitethernet 0/15 direction both
See Also source