Brocade Network OS Command Reference v4.1.0 - Manual (Page 379)

Network OS Command Reference 341
53-1003115-01
ip access-list
2
To create rules on a standard ACL:
switch(config)# ip access-list standard stdACL3
switch(config-ip-std)# seq 5 permit host 10.20.33.4
switch(config-ip-std)# seq 15 deny any
switch(config-ip-std)# exit
switch(config)# ip access-list standard stdACL3
switch(config-ip-std)# no seq 5
switch(config-ip-std)# exit
switch(config)# ipv6 access-list standard stdV6ACL1
switch(config-ipv6-std)# seq 10 permit 2001:db8:85a3:0:0:8a2e:370:7334
switch(config-ipv6-std)# seq 11 deny any
switch(config-ipv6-std)# exit
To create rules on an extended ACL:
switch(config)# ip access-list extended extdACL5
switch(config-ip-ext)# seq 5 deny tcp host 10.24.26.145 any eq 23
switch(config-ip-ext)# seq 7 deny tcp any any eq 80
switch(config-ip-ext)# seq 10 deny udp any any range 10 25
switch(config-ip-ext)# seq 15 permit tcp any any
switch(config-ip-ext)# exit
switch(config)# ip access-list extended extdACL5
switch(config-ip-ext)# no seq 7
switch(config-ip-ext)# no seq 5
switch(config-ip-ext)# exit
switch(config)# exit
switch#
See Also interface management,seq (extended IP ACLs), seq (standard IP ACLs),
show running-config interface management, show running-config ip access-list