Show access-list – Brocade Network OS Command Reference v4.1.0 User Manual

Page 722

684

Network OS Command Reference

53-1003115-01

show access-list

Displays the status of all ACLs bound to a particular interface

Synopsis

show access-list {ip | ipv6 | mac} name {port-channel index | gigabitethernet slot/port |
tengigabitethernet slot/port | fortygigabitethernet slot/port | vlan vlan_id | ve vlan_id} {in | out}
[rbridge-id rbridge-id | all]

Operands

ip | ipv6 |mac

Displays the configured rules of either a Layer 2 or Layer 3 ACL.

name

The “name” of the ACL assigned at creation.

port-channel index

Specifies the port-channel index to which the ACL is bound.

gigabitethernet slot/port

Specifies the 1-gigabit Ethernet interface to which the ACL is bound.

tengigabitethernet slot/port

Specifies the 10-gigabit Ethernet interface to which the ACL is bound.

fortygigabitethernet slot/port

Specifies the 40-gigabit Ethernet interface to which the ACL is bound.

vlan vlan_id

Specifies the VLAN interface to which the ACL is bound. Refer to Usage
Guidelines below.

ve vlan_id

Specifies the virtual Ethernet (VE) interface to which the ACL is bound.
Refer to Usage Guidelines below.

rbridge-id

Specifies one or all RBridge IDs.

rbridge-id

An RBridge ID.

all

Specifies all RBridge IDs.

Specifies the RBridge ID for node-specific ACL interface details.

in | out

Specifies the ACL binding direction (ingress or egress).

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display the status of all ACLs bound to a particular interface.

Usage Guidelines

On the Brocade VDX family of hardware, VLANs are treated as interfaces from a configuration
point of view. By default all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1).
Valid VLAN IDs are as follows:

•

On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

•

On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

Examples

None