Brocade Network OS Command Reference v4.1.0 - Manual (Page 1235)

Network OS Command Reference 1197
53-1003115-01
show users
2
show users
Displays the users logged in to the system and locked user accounts.
Synopsis show users [rbridge-id {rbridge-id | all}]
Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
Defaults None
Command Modes Privileged EXEC mode
RBridge ID mode
Description Use this command to display active user sessions and locked user accounts.
Usage Guidelines None
Examples To display active user sessions and locked user accounts:
switch# show users rbridge-id all
**USER SESSIONS**
RBridge ID Username Role Device Time Logged In
195 admin admin Cli 2014-01-15 15:11:26
**LOCKED USERS**
RBridge ID Username
no locked users
See Also show running-config username, username, unlock username