Brocade Network OS Command Reference v4.1.0 - Manual (Page 1403)

Network OS Command Reference 1365
53-1003115-01
vrf
2
vrf
Creates and enters Virtual Routing and Forwarding (VRF) configuration mode.
Synopsis vrf name
Operands name Character string for the name of the VRF. The string can be up 24
characters long, but should not contain punctuation or special characters.
Defaults None
Command Modes RBridge ID configuration mode
Description Use this command to create and enter Virtual Routing and Forwarding (VRF) configuration mode.
Usage Guidelines None
Examples None
See Also address-family ipv4 unicast (BGP), arp, ip router-id, max-route, network (BGP), next-hop-recursion
(BGP), rbridge-id, rd (route distinguisher)