Brocade Network OS Command Reference v4.1.0 - Manual (Page 882)

844 Network OS Command Reference
53-1003115-01
show ip bgp routes as-path-access-list
2
show ip bgp routes as-path-access-list
Displays BGP4 route information that is filtered by autonomous system (AS)-path access control
list (ACL).
Synopsis show ip bgp routes [as-path-access-list name] [rbridge-id rbridge-id]
Operands as-path-access-list Displays only those routes that use the AS-path ACL defined by name.
name Name of AS-path ACL.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 route information that is filtered by AS-path ACL.
Usage Guidelines None
Examples To view BGP4 routes filtered by AS-path ACL:
switch# show ip bgp routes as-path-access-list myacl
See Also None