Brocade Network OS Command Reference v4.1.0 - Manual (Page 781)

Network OS Command Reference 743
53-1003115-01
show dot1x statistics interface
2
show dot1x statistics interface
Displays the statistics of a specified interface.
Synopsis show dot1x statistics interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the statistics of a specified interface.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display the statistics for the 10-gigabit Ethernet interface 22/0/16:
switch# show dot1x statistics interface tengigabitethernet 22/0/16
802.1X statistics for interface te22/0/16
EAPOL Frames Rx: 0 - EAPOL Frames Tx: 0
EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0
EAP Rsp/Id Frames Rx: 2 - EAP Response Frames Rx: 10
EAP Req/Id Frames Tx: 35 - EAP Request Frames Tx: 0
Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0
EAPOL Last Frame Version Rx: 0 - EAPOL Last Frame Src: 0000.0000.0000
See Also None