Show spanning-tree brief – Brocade Network OS Command Reference v4.1.0 User Manual
Page 1204

1166
Network OS Command Reference
53-1003115-01
show spanning-tree brief
2
show spanning-tree brief
Displays the status and parameters of the Spanning Tree Protocol (STP).
Synopsis
show spanning-tree [vlan vlan_id] brief
Operands
vlan vlan_id
Specifies a VLAN. Refer to the Usage Guidelines.
Defaults
None
Command Modes
Privileged EXEC mode
Description
Use this command to display a summary of the status and parameters of STP for each interface,
including the port roles and port states.
The following describes the port roles and states:
•
Port roles—root port, designated port, alternate port and backup port.
•
Port states—discarding, learning, forwarding, and blocked.
•
Port types—edge port (PortFast), point-to-point, and shared port.
Usage Guidelines
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
•
On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or transport
VFs in a Virtual Fabrics context.When “root guard” is in effect, the show spanning-tree brief
command output shows the port state as ERR, not root_inc.
Examples
To display the interface summary of the Spanning Tree Protocol:
switch# show spanning-tree brief
Spanning-tree Mode: Rapid Spanning Tree Protocol
Root ID
Priority 32768
Address
0005.1e76.1aa0
Hello Time 2, Max Age 20, Forward Delay 15
Bridge ID
Priority 32768
Address
0005.1e76.1aa0
Hello Time 2, Max Age 20, Forward Delay 15, Tx-HoldCount 6
Migrate Time 3 sec
Interface
Role
Sts
Cost
Prio
Link-type
Boundary
Edge
-------------------------------------------------------------------------
Te 0/0
DIS
DSC
2000
128
P2P
Yes
No
Te 0/1
ALT
BLK
2000
128
P2P
Yes
No
Te 0/2
RTPT
BLK
2000
128
P2P
Yes
No
Te 0/3
DIS
BLK
2000
128
P2P
Yes
No
Te 0/8
DIS
DSC
2000
128
P2P
Yes
No
Te 0/19
DIS
DSC
2000
128
P2P
Yes
No
Te 0/20
DIS
DSC
2000
128
P2P
Yes
No