Brocade Network OS Command Reference v4.1.0 - Manual (Page 1349)

Network OS Command Reference 1311
53-1003115-01
threshold-monitor interface
2
threshold-monitor interface
Configures monitoring of port statistics on all external gigabit Ethernet interfaces: 1 GbE, 10 GbE,
and 40 GbE.
Synopsis threshold-monitor interface {[apply policy_name | pause | policy policy_name] typeEthernet area
[CRCAlignErrors
[alert
[above [highthresh-action [[all | lowthresh-action] | email | fence | none | raslog] |
lowthresh-action [all | email none | raslog] |
below [highthresh-action [all | email | fence | none raslog] | lowthresh-action [all | email |
none | raslog]] |
threshold
[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]|
IFG
[alert
[above [highthresh-action [[all | lowthresh-action] | email | fence | none | raslog] |
lowthresh-action [all | email none | raslog] |
below [highthresh-action [all | email | fence | none raslog] | lowthresh-action [all | email |
none | raslog]] |
threshold
[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]|
MissingTerminationCharacter
[alert
[above [highthresh-action [[all | lowthresh-action] | email | fence | none | raslog] |
lowthresh-action [all | email none | raslog] |
below [highthresh-action [all | email | fence | none raslog] | lowthresh-action [all | email |
none | raslog]] |
threshold
[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]|
SymbolErrors]
[alert
[above [highthresh-action [[all | lowthresh-action] | email | fence | none | raslog] |
lowthresh-action [all | email none | raslog] |
below [highthresh-action [all | email | fence | none raslog] | lowthresh-action [all | email |
none | raslog]] |
threshold
[buffer | high-threshold | low-threshold | timebase [day | hour | minute | none]]]}
no threshold-monitor interface
Operands apply Applies a custom policy that has been created by the policy operand.
pause Pause monitoring.
policy Specifies a policy name for monitoring by means of custom settings, rather
than default settings. A policy name is required before additional
configurations can be made. This operation is not supported from a
secondary node.
Specifies the name of a custom policy configuration that can be saved and
applied by means of the apply operand.
type Ethernet Enables gigabit Ethernet interface monitoring.