Brocade Network OS Command Reference v4.1.0 - Manual (Page 774)

736 Network OS Command Reference
53-1003115-01
show diag setcycle
2
show diag setcycle
Displays the current systemVerification test parameters.
Synopsis show diag setcycle [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID of the switch.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display current values used in system verification.
Usage Guidelines None
Examples To display current values used in system verification:
switch# show diag setcycle
CURRENT - KEYWORD : DEFAULT
1 - number_of_runs : 1
2 - min_lb_mode : 2
1 - tbr_passes : 1
16 - plb_nframes : 16
1 - pled_passes : 1
rbridgeId 1
See Also diag setcycle