Show running-config system-monitor – Brocade Network OS Command Reference v4.1.0 User Manual

Page 1177

Network OS Command Reference

1139

53-1003115-01

show running-config system-monitor

Displays the system monitor configuration.

Synopsis

Operands

fan

Displays the threshold and alert setting for the FAN component.

power

Displays the threshold and alert setting for the power component.

temp

Displays the threshold for the temperature sensor component.

cid-card

Displays the threshold for the CID card component.

sfp

Displays the threshold for the small form factor pluggable (SFP) device.

compact-flash

Displays the threshold for the compact flash device.

Displays the threshold for the management module.

LineCard

Displays the threshold for the line card.

SFM

Displays the threshold for the switch fabric module.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display the running system monitor configuration.

Usage Guidelines

This command is supported only on the local switch.

Examples

switch# show running-config system-monitor

system-monitor fan threshold marginal-threshold 1 down-threshold 2

system-monitor fan alert state removed action raslog

system-monitor power threshold marginal-threshold 0 down-threshold 1

system-monitor power alert state removed action raslog

system-monitor temp threshold marginal-threshold 1 down-threshold 2

system-monitor cid-card threshold marginal-threshold 1 down-threshold 0

system-monitor cid-card alert state inserted,faulty action email

system-monitor sfp alert state none action none

system-monitor compact-flash threshold marginal-threshold 1 down-threshold 0

system-monitor MM threshold marginal-threshold 1 down-threshold 0

system-monitor LineCard threshold marginal-threshold 1 down-threshold 0

system-monitor LineCard alert state removed action raslog

system-monitor SFM threshold marginal-threshold 1 down-threshold 0