Brocade Network OS Command Reference v4.1.0 - Manual (Page 1080)

1042 Network OS Command Reference
53-1003115-01
show running-config interface gigabitethernet lldp
2
show running-config interface gigabitethernet lldp
Displays Link Layer Discovery Protocol (LLDP) configuration information for a 1-gigabit Ethernet
interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] lldp [dcbx-version | disable |
iscsi-priority | profile]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
dcbx-version Displays the configured version of the Data Center Bridging Exchange
(DCBX) protocol.
disable Indicates whether LLDP is disabled on the interface.
iscsi-priority Displays the configured priority that will be advertized in the DCBX iSCSI
TLV.
profile Displays the LLDP profile configured on the interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display Link Layer Discovery Protocol (LLDP) configuration information for
the specified interface.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples None
See Also lldp dcbx-version, lldp disable, lldp iscsi-priority, lldp profile