Show edge-loop-detection detail – Brocade Network OS Command Reference v4.1.0 User Manual

Page 783

Network OS Command Reference

745

53-1003115-01

show edge-loop-detection detail

Displays ELD detailed information for the entire node.

Synopsis

show edge-loop-detection detail [rbridge-id {rbridge-id | all}]

Operands

rbridge-id rbridge-id

Specifies the RBridge ID.

all

Specifies all RBridge IDs in the VCS cluster.

Defaults

None

Command Modes

Privileged EXEC mode

ELD configuration mode

Description

Use this command to view detailed ELD information for the entire node.

Usage Guidelines

This functionality detects Layer 2 loops only.

If no rbridge-id rbridge-id is specified, ELD data on the particular node is displayed.

If rbridge-id rbridge-id is specified, ELD data for the node with that particular rbridge-id is
displayed.

If rbridge-id all is specified, ELD data from all the nodes in the cluster is displayed.

Examples

switch(conf-if-te-119/0/1)# do show edge-loop-detection detail

Number of edge-loop-detection instances enabled: 1

Data for Rbridge-id: 119

Total_instances: 1

Eld-mac: 03:05:33:65:1b:ec

Data for interface: te0/1

Eld-instance no. (enabled for VLANs): 1

Priority: 128 If_status: 1

Shutdown-vlan: 0

Vlag-master-id: 0

Age-left: 31913 mins

Port-type : 3 pvid_frame_type: 2

Brcd-agg-type: 0

Eld stats:

Enabled for Vlan-id: 10

Send-untagged: 0

time-rxlimit : 0

Vlan stats:

switch(conf-if-te-119/0/1)#