Brocade Network OS Command Reference v4.1.0 - Manual (Page 1092)

1054 Network OS Command Reference
53-1003115-01
show running-config interface management
2
show running-config interface management
Displays the management interface configuration.
Synopsis show running-config interface management [rbridge-id/ | port] [ip] access group
Operands rbridge-id/ | port Specifies the management interface to be displayed as the rbridge-id
followed by a slash (/) and the port number.
On standalone platforms, the port number for the management port is
always 0.
On a modular switches with two redundant management modules, can
configure two management ports: 1 and 2.
ip Displays the IP addresses configured for the management interface.Use
access-group to display selected addresses only.
access-group Displays the access lists (ACLs) configured on the management interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to show configuration attributes for an AAA server.
Usage Guidelines None
Examples This example displays the authentication mode:
switch# show running-config interface Management 2/2
interface Management 2/2
.
ip access-group extdACL5
See Also show running-config ip access-list, interface management, ip access-list