Brocade Network OS Command Reference v4.1.0 - Manual (Page 840)

802 Network OS Command Reference
53-1003115-01
show firmwaredownloadstatus
2
show firmwaredownloadstatus
Displays the firmware download activity log.
Synopsis show firmwaredownloadstatus [brief] [summary] [rbridge-id {rbridge-id | all}]
Operands brief Displays only the last entry of the firmware download event log.
summary Displays a high-level summary of the firmware download status.
rbridge-id Executes the command on the specified switch.
rbridge-id Specifies the RBridge ID for the switch.
all Specifies all switches in the VCS fabric.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display an event log that records the progress and status of events that
occur during a firmware download. The event log is created by the current firmware download
command and is retained until you issue another firmware download command. A time stamp is
associated with each event.
Usage Guidelines The rbridge-id operand is supported in VCS mode only.
The output varies depending on the hardware platform.
Examples To display the firmware download event log on a Brocade VDX 8770-4:
switch# show firmwaredownloadstatus
[1]: Tue Mar 6 04:05:20 2012
Slot M1: Firmware install begins.
[2]: Tue Mar 6 04:09:02 2012
Slot M1: Firmware install ends.
[3]: Tue Mar 6 04:09:02 2012
Slot M2: Firmware install begins.
[4]: Tue Mar 6 04:12:08 2012
Slot M2: Firmware install ends.
[5]: Tue Mar 6 04:12:09 2012
Slot M1: Firmware starts to swap.
[6]: Tue Mar 6 04:12:09 2012
Slot M2: Firmware starts to swap.
(output truncated)
To display a condensed version of the firmware download status:
switch# show firmwaredownloadstatus brief
[35]: Tue Mar 6 04:23:10 2012
Slot M1: Firmware is downloaded successfully.