Brocade Network OS Command Reference v4.1.0 - Manual (Page 399)

Network OS Command Reference 361
53-1003115-01
ip igmp snooping fast-leave
2
ip igmp snooping fast-leave
Enables snooping fast-leave.
Synopsis ip igmp snooping fast-leave
no ip igmp snooping fast-leave
Operands None
Defaults This command is disabled.
Command Modes VLAN interface configuration mode
Description Use this command to enable Internet Group Management Protocol (IGMP) snooping fast-leave
processing. This allows the removal of an interface from the forwarding table without sending out
group-specific queries to the interface.
Usage Guidelines Enter no ip igmp snooping fast-leave to disable this function.
Examples To enable snooping fast-leave for a specific VLAN interface:
switch(config)# interface vlan 1
switch(config-Vlan-1)# ip igmp snooping fast-leave
To disable snooping fast-leave for a specific VLAN interface:
switch(config)# interface vlan 1
switch(config-Vlan-1)# no ip igmp snooping fast-leave
See Also interface, interface ve, ip igmp snooping enable (global version), show ip igmp snooping,
ip igmp snooping enable, ip igmp snooping mrouter, ip igmp snooping mrouter-timeout,
ip igmp snooping querier enable