Brocade Network OS Command Reference v4.1.0 - Manual (Page 1230)

1192 Network OS Command Reference
53-1003115-01
show threshold monitor
2
show threshold monitor
Displays the current status of environmental thresholds and alerts for interfaces, security, and
SFPs.
Synopsis show threshold monitor [interface all area | security area [login-violation [rbridge-id rbridge-id |
all] | telnet-violation [rbridge-id rbridge-id | all]] | sfp all area
[current |rxp |temperature |txp |voltage]
Operands interface all area Displays status of interface thresholds and alerts.
security area Displays status of security thresholds and alerts.
login-violation Displays status of login violations.
telnet-violation Displays status of Telnet violations.
sfp all area Displays status of SFP thresholds and alerts.
current Amount of current supplied to the SFP transceiver.
rxp Amount of incoming laser power, in microWatts (μW).
temperature Temperature of the SFP, in degrees Celsius.
txp Amount of outgoing laser power, in microWatts (μW).
voltage Amount of voltage supplied to the SFP.
rbridge-id rbridge-id Specifies a switch by means of the switch’s RBridge ID.
all Reports status for all nodes in the cluster.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the current status of environmental thresholds and alerts for
interfaces, security, and SFPs.
Usage Guidelines None
Examples
switch# show threshold monitor security area login-violation rbridge-id all
Rbridge-Id Area Value Status Monitoring Status
154 Login Violation 0 In Range Monitoring
See Also show defaults threshold, system-monitor, system-monitor-mail, threshold-monitor