Brocade Network OS Command Reference v4.1.0 User Manual
Page 265
Network OS Command Reference
227
53-1003115-01
diag setcycle
2
DEFAULT - KEYWORD
: COMMENT
1
- number_of_runs
: number of passes of verify (0=infinite)
2
- min_lb_mode
: Limits -lb_mode of tests
0
- sof
: Enable stop testing on first fail
VERIFY - label : Label for run start and stop messages
1
- tbr_passes
: turboramtest number of passes
16
- plb_nframes
: portloopbacktest number of frames default speed
0
- plb5_nframes
: portloopbacktest (lb_mode 5) number of frames default
speed
0
- plb7_nframes
: portloopbacktest (lb_mode 7) number of frames
0
- pled_action
: portledtest action for glowing all led's
1
- pled_passes
: portledtest number of passes
1
- prbs_p7
: LC Backplane test with pattern PRBS7+
0
- prbs_p23
: LC Backplane test with pattern PRBS23+
0
- prbs_p31
: LC Backplane test with pattern PRBS31+
0
- cprbs_p7
: SFM Backplane test with pattern PRBS7+
0
- cprbs_p23
: SFM Backplane test with pattern PRBS23+
0
- cprbs_p31
: SFM Backplane test with pattern PRBS31+
16
- cplb_nframes
: portloopbacktest in Core Blade number of frames
0
- cplb7_nframes : portloopbacktest in Core Blades (lb_mode 7) number of
frames
In fixed-configuration switches:
switch# diag setcycle
Do you want use default values [Y/N]? : y
DEFAULT - KEYWORD : COMMENT
replacing 3 with default 1
1 - number_of_runs : number of passes of verify (0=infinite)
2 - min_lb_mode : Limits -lb_mode of tests
1 - tbr_passes : turboramtest number of passes
16 - plb_nframes : portloopbacktest number of frames default speed
Committing changes to configuration
See Also