beautypg.com

Brocade Network OS Command Reference v4.1.0 User Manual

Page 1083

background image

Network OS Command Reference

1045

53-1003115-01

show running-config interface gigabitethernet port-profile-port

2

show running-config interface
gigabitethernet port-profile-port

Displays whether AMPP port-profile configuration mode is enabled for a 1-gigabit Ethernet
interface.

Synopsis

show running-config interface gigabitethernet [rbridge-id/slot/port] port-profile-port

Operands

rbridge-id

Specifies a switch by its RBridge ID.

slot

Specifies a valid slot number.

port

Specifies a valid port number.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display whether AMPP port-profiling is configured for the specified interface.

Usage Guidelines

This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.

Examples

switch# show running-config interface gigabitethernet 1/0/8 port-profile-port

interface Gigabit Ethernet 1/0/8

port-profile-port

See Also

port-profile-port