Brocade Network OS Command Reference v4.1.0 - Manual (Page 153)

Network OS Command Reference 115
53-1003115-01
clear ip bgp routes
2
clear ip bgp routes
Clears BGP4 routes from the IP route table and resets the routes.
Synopsis clear ip bgp routes [ip-addr {/mask}]
Operands ip-addr IPv4 address of a specified route in dotted-decimal notation.
mask (Optional) IPv4 mask of a specified route in CIDR notation.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear BGP4 routes from the IP route table and reset the routes.
Usage Guidelines None
Examples To clear BGP4 routes:
switch# clear ip bgp routes 10.0.0.0/16
See Also None