Port-profile (global configuration mode) – Brocade Network OS Command Reference v4.1.0 User Manual

Page 582

544

Network OS Command Reference

53-1003115-01

port-profile (global configuration mode)

Creates a new Automatic Migration of Port Profiles (AMPP) port-profile in the fabric.

Synopsis

port-profile profile-name [activate | qos-profile | security-profile | vlan-profile |
static mac-address]

no port-profile profile-name

Operands

profile-name

A fabric-wide unique name of a port-profile.

activate

Activates the specified profile

qos-profile

Enters directly into edit mode for the QoS sub-profile.

security-profile

Enters directly into edit mode for the security sub-profile.

vlan-profile

Enters directly into edit mode for the VLAN sub-profile.

static mac-address

Statically associates the profile VM MAC address.

Defaults

None

Command Modes

Global configuration mode

Description

Use this command to create a new AMPP port-profile in the fabric with the specified name and
shift to the port-profile mode. If the port-profile name already exists, then the switch enters
port-profile mode and edits the existing profile.

A system-generated fabric-wide unique port-profile ID is assigned by default.

You can also directly access the submodes for the profile, and assign the profile statically to a MAC
address.

Security profiles are applied to the ACLs based on the profile or PolicyID. Therefore, multiple
security profiles can be applied to the same profiled port.

Usage Guidelines

Enter no port-profile profile-name to de-activate the port-profile.

Examples

None