Brocade Network OS Command Reference v4.1.0 - Manual (Page 562)

524 Network OS Command Reference
53-1003115-01
nssa-translator (OSPF)
2
nssa-translator (OSPF)
Configures Not So Stubby Area (NSSA) Type 7-to-Type 5 Link State Advertisement (LSA) translation.
Synopsis nssa-translator
no nssa-translator
Defaults None
Defaults Translation is enabled.
Command Modes OSPF VRF router configuration mode
Description Use this command to enable or disable NSSA Type 7-to-Type 5 LSA translation on the NSSA Area
Border Router (ABR). Translation may be needed if routers within the NSSA need to know about
external routes. However, disabling this translation can be useful when the router is an area border
router with many NSSA areas, and does not need to export the NSSA external routes into the
backbone.
Usage Guidelines Enter no nssa-translator to disable NSSA Type 7-to-Type 5 translation.
Examples To disable NSAA Type 7-to-Type 5 LSA translation:
switch# configure
switch(config)# rbridge-id 5
switch(config-rbridge-id-5)#router ospf
switch(config-router-ospf-vrf-default-vrf)# no nssa-translator
See Also None