Brocade Network OS Command Reference v4.1.0 - Manual (Page 169)

Network OS Command Reference 131
53-1003115-01
clear lldp statistics
2
clear lldp statistics
Clears LLDP statistics for all interfaces or a specified interface.
Synopsis clear lldp statistics interface [fortygigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]
Operands interface Use this parameter followed by the slot or port number to identify the
interface.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear LLDP statistics for all interfaces or a specified interface.
Usage Guidelines If the interface parameter is not specified, this command clears all the LLDP statistics on all
interfaces.
Examples To clear all the LLDP statistics for all interfaces:
switch# clear lldp statistics
See Also show lldp statistics