Brocade Network OS Command Reference v4.1.0 - Manual (Page 872)

834 Network OS Command Reference
53-1003115-01
show ip bgp neighbors
2
show ip bgp neighbors
Displays configuration information and statistics for BGP4 neighbors of the device.
Synopsis show ip bgp neighbors {ip-addr | route-summary | last-packet-with-error} [rbridge-id rbridge-id]
Operands ip-addr IPv4 address of a neighbor in dotted-decimal notation.
route-summary Displays routes received, routes accepted, number of routes advertised by
peer, and so on.
last-packet-with-error Displays the last packet with an error.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view configuration information and statistics for BGP4 neighbors of the
device. Output shows all configured parameters for the neighbors. Only the parameters whose
values differ from defaults are shown.
Usage Guidelines None
Examples
switch# show ip bgp neighbors route-summary
See Also None