Brocade Network OS Command Reference v4.1.0 User Manual

Page 1386

1348

Network OS Command Reference

53-1003115-01

vcs (standalone mode)

The following provides command examples of enabling Brocade VCS fabric cluster mode:

See aAso

Command examples for enabling logical chassis cluster mode

Command

Command Behavior

switch# vcs logical-chassis

enable

The VCS ID becomes the default value of 1, the RBridge ID is not
changed, and Brocade VCS logical chassis cluster mode is
enabled.

switch# vcs vcsid 22 rbridge-id

15 logical-chassis enable

The VCS ID is changed to 22, the RBridge ID is changed to 15, and
Brocade VCS logical chassis cluster mode is enabled.

switch# vcs vcsid 11

logical-chassis enable

The VCS ID is changed to 11, the RBridge ID is not changed, and
Brocade VCS logical chassis cluster mode is enabled.

switch# vcs rbridge-id 6

logical-chassis enable

The VCS ID becomes the default value of 1, the RBridge ID is
changed to 6, and Brocade VCS logical chassis cluster mode is
enabled.

Command examples for enabling fabric cluster mode

Command

Command Behavior

switch# vcs enable

The VCS ID becomes 1, the RBridge ID is not changed, and
Brocade VCS fabric cluster mode is enabled.

switch# vcs vcsid 55 rbridge-id

19 enable

The VCS ID is changed to 55, the RBridge ID is changed to 19, and
Brocade VCS fabric cluster mode is enabled.

switch# vcs vcsid 73 enable

The VCS ID is changed to the value of 73, the RBridge ID is not
changed, and Brocade VCS fabric cluster mode is enabled.

switch# vcs rbridge-id 10

enable

The VCS ID becomes the default value 1, the RBridge ID is
changed to 10, and Brocade VCS fabric cluster mode is enabled.

Thefollowing provides command examples for switches that are already in either fabric cluster
mode or logical chassis cluster mode.

Command examples when one of the VCS modes is already enabled:

Command Command

Behavior

vcs vcsid 44 rbridge-id 22

The VCS ID is changed to 44 and the RBridge ID is changed to 22.

vcs vcsid 34

The VCS ID is changed to 34.