Brocade Network OS Command Reference v4.1.0 - Manual (Page 1291)

Network OS Command Reference 1253
53-1003115-01
speed (port-channel)
2
speed (port-channel)
Sets the speed on the port-channel interface.
Synopsis speed {1000 | 10000 | 40000}
no speed
Operands 1000 Forces the speed to 1 Gbps.
10000 Forces the speed to 10 Gbps.
40000 Forces the speed to 40 Gbps.
Defaults Speed is 10000.
Command Modes Port-channel interface subtype configuration mode
Description Use this command to set the speed negotiation value for a specific port-channel interface.
Usage Guidelines Enter no speed to return to the default setting.
Examples To set the speed to 40 Gbps on a specific port-channel interface:
switch(config)# interface port-channel 44
switch(config-Port-Channel-44)# speed 40000
See Also interface