Brocade Network OS Command Reference v4.1.0 - Manual (Page 145)

Network OS Command Reference 107
53-1003115-01
clear dot1x statistics interface
2
clear dot1x statistics interface
Clears the dot1x statistics for a port.
Synopsis clear dot1x statistics interface [gigabitethernet rbridge-id/slot/port |
tengigabitethernet rbridge-id/slot/port]
Operands gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to clear all of the dot1x statistics for a specific interface port.
Usage Guidelines None
Examples To clear dot1x statistics on a port:
switch# clear dot1x statistics interface tengigabitethernet 0/16
See Also clear dot1x statistics