Show capture packet interface – Brocade Network OS Command Reference v4.1.0 User Manual

Page 735

Network OS Command Reference

697

53-1003115-01

show capture packet interface

Displays information about captured packets.

Synopsis

show capture packet interface {all | fortygigabitethernet rbridge-id/slot/port | gigabitethernet
rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}

Operands

all

Selects all interfaces.

fortygigabitethernet

Selects a 40-GbE interface.

gigabitethernet

Selects a 1-GbE interface.

tengigabitethernet

Selects a 10-GbE interface.

rbridge-id/slot/port

Selects the RBridge ID, slot, and port of the respective interface.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display information captured by means of the capture packet interface
command.

Usage Guidelines

This command is supported in VCS and standalone mode. This command can be entered on any
RBridge in a Brocade VCS Fabric.

Examples

switch# show capture packet interface all

Packet Capture configured on the following interfaces

Te 130/0/5 >> ISL

Te 130/0/6 >> ISL

Te 130/0/21

Te 130/0/23

Te 130/0/24

Frame Received Time : Sat Mar 9 2013 0:57:0:282

Packet Type : ELD

Packet Direction : TX

Interface info : Te 130/0/21

ETHERNET

HEADER

SrcMAC : 00:05:33:5e:01:67

DstMAC : 03:05:33:5d:f3:fa

Ethtype : 0x8100

Eth Frametype : 0x33

VlanID : 0xfff

ELD PAYLOAD DETAILS

---------------------------

Vlan id : 2

Src-Rbridgeid : 130

Src-Priority : 5

Magic Number : 5103